| Length | 580mm |
|---|---|
| Width | 580mm |
| Height | 880mm |
| Weight | 205kg |
RENOLIN B 68 HVI PLUS is a premium hydraulic oil with a high viscosity index designed to provide superior ageing resistance, corrosion protection, and wear protection. Developed by Fuchs, it features low friction properties that reduce energy consumption and wear during pump start-up, consequently improving reliability and eliminating breakdowns due to viscosity issues.
• Kinematic Viscosity @ 40 °C: 68 cSt
• Kinematic Viscosity @ 100 °C: 10.6 cSt
• Viscosity Index: 145
• Density @ 15 °C: 0.880 Kg/L
• Flash Point COC: 242 °C
• Pour Point: -38 °C
• FZG mechanical gear test rig FZG A/8,3/90: 11 failure load
• Total Acid Number: 0.1 mg KOH/g
• VKA Shear Stability: <20%
• Oxide Ash: 0.1%
Recommended for use in hydraulic systems, RENOLIN B 68 HVI PLUS ensures stable protective films at high temperatures, maintaining excellent lubrication and sealing properties. Superior demulsifying and deaeration capabilities, along with good elastomer compatibility, make it an ideal choice for various industrial applications.
• Reduces energy consumption and wear when hydraulic pumps start up
• Improves system reliability and reduces breakdowns
• Superior oxidation stability and resistance to ageing
• Excellent protection against wear
• Excellent shear stability ensuring consistent performance
RENOLIN B 68 HVI PLUS hydraulic oil should be used as directed by the machinery manufacturers. Ensure that the system is clean before filling. Regular checks should be performed to maintain optimal performance. Replace the oil based on manufacturer intervals or analysis recommendations.
Suitable for use in various hydraulic systems including equipment requiring: ISO 6743-4, DIN 51 524-3 (HVLP), Denison HFO, Bosch Rexroth, Vickers, US Steel, and Cincinnati Milacron specifications.
580
580
880
The function of hydraulic oil pumps can often be improved irrespective of the machinery driven, because they are isolated from the variables found at the workplace. A major factor in the performance of hydraulic systems is the fluid medium. This absorbs a relatively large amount of energy when the pump is started up because of the high internal resistance of hydraulic oil. Excessive friction also occurs if the oil’s viscosity is too low and this leads to wear. Such conditions can cause breakdowns. Fuchs has developed a series of so-called low friction oils, which reduce energy consumption and wear when hydraulic pumps are started up. These products also improve reliability and eliminate breakdowns caused by insufficient or excess viscosity, both problems associated with normal HLP hydraulic oils.
(C2)
Combustible Liquid C2 (not DG for transport)
