| Length | 250mm |
|---|---|
| Width | 250mm |
| Height | 400mm |
| Weight | 20kg |
RENAIR Compressor Oils, blended from solvent-refined mineral oils, provide enhanced wear and oxidation reduction. They support high load, severe operating conditions, and extended service intervals. Complying with DIN 51 506 and DIN 51 356, they offer optimal oxidation inhibition and corrosion prevention.
• DIN 51 506
• DIN 51 356
• Kinematic Viscosity @ 40 °C: 150 cSt
• Viscosity Index: 100
• Pour Point: -10 °C
• Kinematic Viscosity @ 100 °C: 15.0 cSt
• Conradson Carbon Residue: 0.25 %
• FZG mechanical gear test rig: 12 failure load
• Density @ 15 °C: 0.895 Kg/L
• Good oxidation stability and good resistance to ageing
• Provides excellent wear and corrosion protection
• Long service life: Up to 4000 hours in normal operating conditions (32,46,68), Up to 2000 hours in normal operating conditions (100,150)
• Minimal carbon deposit formation
• Good air separation and low foaming
• Good demulsifying properties
• Good compatibility with sealing materials
• Excellent oxidation inhibition for prolonged oil life
• Superior wear and corrosion protection
• Minimal coking tendency for cleaner operation
• Extends service intervals reducing maintenance
• High load and severe operation condition compatible
• Suitable for heat transfer up to 300ºC
To use RENAIR 150 Compressor Oil, follow these steps:
1. Refer to the compressor manual for oil change intervals and specifications.
2. Ensure the compressor is off and cooled down before starting the oil change.
3. Remove the old oil from the compressor carefully.
4. Fill the compressor with the appropriate amount of RENAIR 150 oil.
5. Check for any leaks and ensure the oil level is optimal.
6. Run the compressor and check for proper operation.
7. Dispose of the old oil responsibly according to local regulations.
Suitable for oil-lubricated air compressors including Rotary Screw, Reciprocating, and certain types of Rotary Vane Compressors. Also applicable in heat transfer systems up to 300ºC.
250
250
400
RENAIR Compressor Oils are blended from carefully selected solvent refined mineral oils, which provide optimum oxidation inhibition, excellent corrosion prevention and minimal coking tendency. RENAIR oils comply and exceed the requirements of DIN 51 506 for lubricating oils and DIN 51 356 for carbon residue. RENAIR oils contain additives to reduce wear and oxidation and therefore allow higher load, more severe operation conditions and prolonged oil service intervals. Suitable for use as a heat transfer oil in closed circuit systems at temperatures up to 300ºC.
(C2)
Combustible Liquid C2 (not DG for transport)
