10+ in stock
SKU: MFO62002104
The L244 Zinc Spray Bright 400ml from Forch is an excellent choice for repairing and protecting metallic surfaces. It provides superior corrosion resistance, making it perfect for aftertreatment of damaged hot-dipped galvanised parts. This zinc spray is weather-resistant, protects against rust and salt, and can be spot-welded. It is overpaintable with commonly available plastic resin paint systems, though test spraying is recommended. It is temperature resistant up to +400°C, ensuring longevity and durability.
Brand: Forch
Model: L244 Zinc Spray Bright
Can Size: 400ml
Corrosion Resistance: Active according to DIN 50021
Salt Spray Test: 528 hrs according to DIN 20021
Temperature Resistance: Up to 400°C
Zinc Contents in Pigments: >98%
Zinc Contents in Dry Film: ~70%
Recommendations: Shake aerosol vigorously for approx. 2 minutes after mixing ball is heard. Cross spray from a distance of approx. 20 – 30 cm. One coat is usually sufficient. For additional coats, allow 5 minutes between coats. Not suitable for over-laying with fillers. Not suitable as undercoat for PU, MS-polymer and hybrid sealing compounds.
Provides active corrosion resistance, protecting and improving metallic surface conditions. Can be used for repairing and maintaining hot-dipped galvanised parts. Easy to use with overpainting capabilities. Weather-resistant, rust and salt protection ensures durability. Heat resistant up to 400°C for various applications.
Ensure parts to be treated are clean, dry, and free of grease and rust. Shake aerosol vigorously for approximately 2 minutes after the mixing ball is heard. Spray from a distance of approximately 20 – 30 cm using a cross-spray technique. Allow 5 minutes between coats if additional coats are required.
Suitable for use on metallic surfaces requiring corrosion protection and repair, including hot-dipped galvanised parts.
For optimum repair, improvement and protection against corrosion of metallic surfaces. Active corrosion resistance according to DIN 50021. Salt spray test at 528 hrs according to DIN 20021. Corrosion resistant zinc coating in hot-dipped colouring. Weather-resistant and protects against rust and salt. For aftertreatment of damaged hot-dipped galvanised parts. Can be spot-welded. Overpaintable with commercially available plastic resin paint systems. Test spraying is recommended. Temperature resistant up to +400 °C. Zinc contents of pigments more than 98%. Zinc contents dry film approx. 70%. Parts to be treated must be clean, dry, free of grease and rust. Shake aerosol vigorously for approx. 2 minutes after mixing ball is heard. Cross spray from a distance of approx. 20 – 30 cm. One coat usually sufficient. For additional coats allow 5 minutes between coats. Not suitable for over-laying with fillers. Not suitable as undercoat for PU, MS-polymer and hybrid sealing compounds.
